My Shop
-->





Our Products

alt

Graphite Fines (GPC)

Request a Quote


Description


We are one of the largest suppliers of various grades Graphite Fines in India.
It is mainly used for Carbon addition in S G Iron metal.


Specification


Fixed Carbon : 97 to 99.30% ,
Sulphur : 0.03 to 0.10%
Nitrogen : 100 to 200PPM
Size : 0 to 1, 0.2 to 1, 0.5 to 5, 1 to 3, 1 to 7mm or as required.


Note :


We can supply Graphite for lubrication, battery, and other applications as per customer requirement.
Click HereClick HereClick Here
alt

Calcined Petroleum Coke(CPC)

Request a Quote


Description


We are one of the largest suppliers of various grades CPC in India.
It is mainly used for Carbon addition in Cast Iron metal.


Specification


Fixed Carbon : 97 to 99.30% ,
Sulphur : 0.60 to 2.50%
Nitrogen : 150 to 300PPM
Size : 0.5 to 5, 1 to 5, 5 to 25mm or as required.


Note :


We have special Fast Melting Grades for high power density furnaces to avoid late pickup of carbon.
Click HereClick HereClick Here
alt

Carburiser

Request a Quote


Description


We supply superior quality of Carburisers in India than available in the market.
It is mainly used for Carbon addition in S G Iron metal.


Specification


Fixed Carbon : 90 to 95% ,
Sulphur : 0.20 to 0.30%
Size : 0.5 to 5, or as required.


Note :


We have special Fast Melting Grades for high power density furnaces to avoid late pickup of carbon.
Click HereClick HereClick Here
alt

Coconut Shell Charcoal

Request a Quote


Description


We are suppliers of good quality, dirt free and dry Coconut Shell Charcoal in India.
It is mainly used for Carbon addition in S G Iron metal as it does not contain sulphur.


Specification


Fixed Carbon : 70 to 80% ,
Sulphur : Practically Nil.
Nitrogen : Practically Nil
Size : 10 to 50mm.
Moisture : 10 to 12%


Note :


We can supply Graphite for lubrication, battery, and other applications as per customer requirement.
Click HereClick HereClick Here
alt

Refractory Castables

Request a Quote


Description


Refractory Cement castables are used to do lining for Furnaces, Ovens, Ladles,
Boilers, Cupola etc. It is refractory cement used to bind Fire Bricks and increase
lining life.
We supply ACE Caldreys and Orient Abrasive make products as per requirement.


Specification


Al2O3 : 50 to 95%,
Service Temperature : 1000 to 1700 Deg.


Note :


We also take lining orders with material as project.
Click HereClick HereClick Here
alt

Refractory Joining Paste and Fire Clay

Request a Quote

DESCRIPTION


We supply special paste binder for lining of Fire Bricks for high temperature applications. We also supply Fire Clay powder as binder for Fire Bricks.

Click HereClick HereClick Here
alt

Neutral Ramming Mass

Request a Quote


Description


We supply Neutral Ramming mass especially for Steel Foundries. It gives better life
compared to Acidic Ramming Mass. It absorbs heat shocks and avoids tendency of sudden
furnace crack/ leakage / failure.


Specification


It comes in premix form in ready to use condition.
Service temperature : 1650 to 1700 Deg.


Note :


We can supply material as per customer specifications also.
Click HereClick HereClick Here
alt

Acidic Ramming Mass

Request a Quote


Description


We supply Acidic (Silica) Ramming mass for ferrous foundries. It gives better life and
competitive price. It is available in Premix and Without Premix grades.
It is useful for Cast Iron , Steel and S G Iron metal.


Specification


Premix Ramming mass with Boric Acid,
Without Premix Ramming mass
Service Temperature : 1450 to 1650 Deg.


Note :


We can supply material as per customer specifications also.
Click HereClick HereClick Here
alt

Ceramic Insulation Paper

Request a Quote


Description


Ceramic Insulation Paper is used as highly heat and electricity insulation paper
media. In foundry, it is used in Ladle lining to avoid heat losses by conduction.
It is used for heat insulator in various core making oven and core box applications.


Specification


Size : Sq. 1M x 1M x 1/2/3/5mm thick paper.


Note :


We can supply as per customer requirement.
Click HereClick HereClick Here
alt

Ceramic Blankets

Request a Quote


Description


Ceramic Blankets are used for heat insulation in various applications. Mainly it is used to cover ladle to avoid heat loss by conduction. It is available in blanket form in various sizes and grades to suit various applications. We offer various makes based of customer requirement


Specification


Density : 68, 96 and 128 g/cc
Material : Regular and Zirconia
Service Temperature : 1000, 1200, 1260, 1400Deg.


Note :


We also supply Ceramic Blanket Modules.
Click HereClick HereClick Here
alt

Mica Insulation Paper

Request a Quote


Description


Mica Insulation Paper is used as highly heat and electricity insulation paper media.
In foundry, it is used in Induction furnace along the coil to avoid heat losses to
cooling coil. Also it protects coil coat from getting damages during changing lining
material. It is used for heat insulator in various core making oven and core box applications.


Specification


Size : 0.5mm Thick x 1 M x 25M long roll.


Note :


We can supply as per customer requirement.
Click HereClick HereClick Here
alt

Asbestos Sheet

Request a Quote


Description


We supply Asbestos sheets in various sizes. In foundry, it is used in Induction
furnace along the coil to avoid heat losses to cooling coil. Also it protects coil
coat from getting damages during changing lining material. It is used for heat
insulator in various core making oven and core box applications


Specification


Size : Sq. 1M x 1M x 1.50/3/5/12.5mm thick sheet.


Note :


We can supply as per customer requirement.
Click HereClick HereClick Here
alt

Refractory Fire Bricks

Request a Quote


Description


Refractory Fire Bricks are used to do lining for Furnaces, Ovens, Ladles, Boilers,
Cupola to get better lining life. It is made as per the shape and size required to the
application. The selection of grade of depends upon kind of heat and its
temperature. We supply insulating as well as acid proof bricks also.


Specification


Al2O3 : 25% to 95%, Also low Fe material.
Service Temperature : 1000 to 1700 Deg.


Note :


We also take lining orders with material as project.
Click HereClick HereClick Here
alt

Ceramic Pressed Filters

Request a Quote


Description


Ceramic Pressed Filters are use to filter liquid metal to separate solid and liquid
slag. Pressed Filters are supposed to be most effective in avoiding metal turbulence
and flow control. It is used for Cast Iron and S G Iron. The size is selected based
on flow rate and pouring time.


Specification


Round Filters : Sq. 40 to 70mm
Square Filters : Sq. 37x37 to 100x100mm
Hole Size : 2 to 5mm
Material : Alumina Oxide
Service Temperature : Upto 1400 Deg.


Note :


We help is selection of filters.
Click HereClick HereClick Here
alt

Ceramic Foam Filters

Request a Quote


Description


Ceramic Foam Filters are use to filter liquid metal to separate solid and liquid
inclusions into it. Foam Filters are supposed to be most effective filtration media
and have faster filtration rates. The size and design is selected based on type of
metal, flow rate, temperature etc.


Specification


Round Filters : Dia.30 to 90mm, Sq. 40x40 to 300x300mm
Hole Size : 10 to 30PPI
Material : Silicon Carbide , Alumina
Service Temperature : 800 to 1500 Deg.


Note :


We help is selection of filters.
Click HereClick HereClick Here
alt

Ceramic Extruded Filters

Request a Quote


Description


Ceramic Extruded Filters are use to filter liquid metal to separate very fine solid
and liquid inclusions into it. Extruded Filters are supposed to be most effective
filtration media for Cast Iron and have faster filtration rates. The size is selected
based on flow rate, temperature etc.


Specification


Square Filters : Sq. 37x37 to 100x100mm
Hole Size : 100 to 300CSI
Material : Silicon Carbide, Alumina
Service Temperature : 800 to 1500 Deg.


Note :


We help is selection of filters.
Click HereClick HereClick Here
alt

Resilient Graphite

Request a Quote


Description


We supply untreated Resilient Graphite for Oil Drilling application as per customer
requirement.


Specification


Fixed Carbon : 97 to 99 %,
Mesh Size : -20 to -200 mesh


Note :


We supply special grades as per customer need.
Click HereClick HereClick Here
alt

Inoculants

Request a Quote


Description


We supply best quality of Inoculants required for Cast Iron and S. G Iron. Basically
these are used to generate nuclei in liquid metal and get better machinability by
avoiding carbide formation. We supply different grades and size distribution based
on metal and casting requirement.


Specification


Barium Inoculant and Strontium Inoculant.
Size : 0.2 to 3, 2 to 6 or as required.


Note :


We can supply Inoculant as per requirement, applications and as per customer requirement.
Click HereClick HereClick Here
alt

Nodularant

Request a Quote


Description


We supply best quality of Nodularant required for making S. G Iron. Basically these
are used to convert flake graphite into spheroid shape. The composition we supply
develops consistent nodules by giving bets properties into the castings. We supply
different grades and size distribution based on metal and casting requirement.


Specification


Nodularant.
Magnesium : 6 to 8%, 8 to 10%.
Size : 5 to to 15, 10 to 25mm or as required.


Note :


We can supply Nodularant as per requirement, applications and as per customer requirement.
Click HereClick HereClick Here
alt

Perlite Ore
(Slag Holding Compound)

Request a Quote


Description


We supply un expanded, superior quality high expansion and low spurting Slag Holding compound for Ferrous and Copper Base alloys. It is mainly used to remove liquid slag on the metal in the furnace and ladle. It also acts as heat insulator layer on liquid metal.


Note :


We offer Low Spurting and High Expansion material for better slag removal.
Click HereClick HereClick Here
alt

Natural Graphite Powder

Request a Quote


Description


We supply all grades of Natural Crystalline Graphite Powders. It has wide applications
in foundry as for Mould release, Core dressing, Core coating etc. Apart from that,
it is used for making Foundry Coatings to improve casting finish, Lubrication,
Battery manufacturing, Earthing application, Carbon brush making, Anode coating etc.


Specification


Fixed Carbon : 50 to 99.9%,
Mesh Size : -150 to -500 mesh


Note :


We supply special grades as per customer need.
Click HereClick HereClick Here
alt

Bentonite Powder

Request a Quote


Description


We supply best in class Bentonite Powder for foundry application. Our product has
substantially reduced addition levels. At the same time, reduced active clay, dead
clay, moisture level, with increased GCS, free flowing sand with increased
refractoriness.


Specification


MB Value : 400 to 430
pH Value : 9.50 to 10.50


Note :


We supply special grades as per customer need.
Click HereClick HereClick Here
alt

Red Oxide
(Iron Oxide)

Request a Quote


Description


We supply Natural Red Oxide Powder. It has wide applications in foundry as for Mould
and Core additive, in reson coated sand to increase hot strength, pigment
application etc.


Specification


Fe2O3 : Above 70%,
Mesh Size : -150 to -200 mesh


Note :


We supply special grades as per customer need.
Click HereClick HereClick Here
alt

Boric Acid

Request a Quote


Description


We supply best quality Boric Acid for Acidic Ramming Mass lining purpose.
Click HereClick HereClick Here
alt

Steel Cut Wire Shots

Request a Quote


Description


We supply superior quality Steel Cut Wire Shots for shot blasting application for
Iron, Steel castings and Forgings. These are made from cutting steel wire into
desired length. These do not have any brittleness and blow holes. So it gives better
life and fast cleaning than cast steel shots. These are also available in rounded ,
conditioned form.


Specification


Dia.1.50mm x 2.20mm length
Dia.1.0mm x 1.25mm length


Note :


We supply special grades as per customer need.
Click HereClick HereClick Here
alt

Cast Steel Shots

Request a Quote


Description


We supply superior quality Cast Steel Shots for shot blasting application for Iron and Steel castings. These are made by casting process in desired diameter. These do not have sharp edge, so it gives better surface finish to castings.


Specification


S-280, S-330, S-390,S-460, S-550, S-660


Note :


We supply special grades as per customer need.
Click HereClick HereClick Here
alt

Stainless Steel Shots

Request a Quote


Description


We supply Cut Wire and Conditioned Stainless Steel Shots of superior quality and
uniform size. These shots are used for shot blasting of Aluminium castings. These are
made by wire cutting process and then conditioned as per requirement. These shots
give bright surface finish to castings.


Specification


0.6mm, 0.8mm, 1.0mm


Note :


We supply special grades as per customer need.
Click HereClick HereClick Here
alt

Graphite Blocks / Rods

Request a Quote


Description


We supply pure Graphite blocks, plates, rods and parts as per customer requirement.
These are used in various applications like electrodes, lubrication, crucible making,
electrical assembly etc.


Specification


Fixed Carbon : 98.50 to 99.30% ,
Size : from 25mmx25mmx25mm to 600x600x600mm.


Note :


We can supply Graphite Blocks as per customer requirement.
Click HereClick HereClick Here
alt

Zircon Sand

Request a Quote


Description


We supply high refractory Zircon Sand. It is used mainly in Steel foundries to get
good refractoriness and avoid sand fusion in selected areas. It is also used in Wax
mould process as refractory filler. Zircon Flour is used in many refractory coatings
to improve casting surface finish


Specification


ZrO2 Content : 50%
Mesh Size : -60 mesh


Note :


We supply special grades as per customer need.
Click HereClick HereClick Here
alt

Chromite Sand

Request a Quote


Description


We supply high refractory Chromite Sand. It is used mainly in Steel foundries to get
good refractoriness and avoid sand fusion in selected areas.


Specification


Cr2O3 : 45 to 50%
Mesh Size : -40 to 50 mesh


Note :


We supply special grades as per customer need.
Click HereClick HereClick Here
alt

Ferro Silicon

Request a Quote


Description


We supply best quality of Ferro Silicon required for Cast Iron , S. G Iron and Steel
Foundries. These are available in various sizes and composition.


Specification


Ferro Silicon : 40%, 70% and 75% content.
Size : 1 to 4, 10 to 60, 25 to 100 or as required.


Note :


We can supply Ferro Silicon as per requirement, applications and as per customer requirement.
Click HereClick HereClick Here
alt

Silicon Carbide

Request a Quote


Description


We are one of the best quality suppliers of Silicon Carbide in India. It is most cost effective product, used for Carbon and Silicon addition in S G Iron metal. It creates nuclei in the liquid metal and avoids carbide formation and hence improves machinability. We get Silicon recovery of 50 to 60% and Carbon recovery of 15 to 20% in various grades. It is most cost effective method to


Specification


Silicon Carbide : 85%, 88%.
Silicon Recovery : 50 to 60%
Carbon Recovery : 15 to 20%
Sulphur : 0.03 to 0.10%
Size : 1 to 10mm or as required.


Note :


We can supply Silicon Carbide for various applications and as per customer requirement.
Click HereClick HereClick Here

Our Client

alt
alt
alt
alt
alt
alt

About Us

In the year 2000 young Owner, Mr. Satish Kadukar (Post-graduate in Mechanical Engineering) founded 'Enpro Enterprises' in Maharashtra. The company was set up in just Rs.50, 000 as a capital, with an aim of supplying a full package of products to foundry and allied Industries. Moreover, the company is known as the prime Supplier of Carbon Additives, Minerals, Refractories, Induction Furnace Lining Materials, Perlite Ore, Graphite Electrodes and Steel Shots, The company has 20 employees linked with the direct contact, at all levels. Our Management Philosophy is to delegate down the line.

Enpro Enterprises

Vision &
Mission

Our vision is to achieve recognition as a leading foundry and refractory material Supplier through focus on the customers and quality of the products. Furthermore, following are some of the missions of the company :
1. Nurture ethically managed organization
2. Not exploiting the customers, employee, government, society, and nature.

Enpro Enterprises

Company
Policy

Enpro is committed to procure and deliver the unmatched products, in order to exactly meet the specific requirements of the customers. This objective can be achieved by means of continual improvement in all the activities of the organization through effective teamwork.

Enpro Enterprises

Our
Objectives

Following are some of the objectives that the company endeavors to achieve with its hard work and dedication :
Customer satisfaction | Growth of the company
Employee development | Waste elimination
Cost reduction | Continuous improvement





Read More

about our work
& practise

About




Enpro is the fastest growing business enterprise, catering to the requirements of the foundries and allied industries. Based in Kolhapur (Maharashtra), the company is reckoned as the Supplier of Graphitized Petroleum Coke, Calcined Petroleum Coke, Carburiser, Coconut Shell Charcoal, Graphite Blocks , Silicon Carbide, Ferro Silicon, Inoculant, Ferro Silicon Magnesium (Nodulizer) Chromite Sand, Zircon Sand, Bentonite, Steel Shots, Stainless Steel Shots, Steel Cut Wire Shots, Refractory Castable Cements, Ceramic Blankets, Mica Insulation, Asbestos Sheets, Ceramic Foam Filters, Insulating and Refractory Hi Alumina Refractory Bricks, Boric Acid, Premix Acidic Ramming Mass, Graphite Powder, Iron Oxide (Red Oxide), Perlite Ore, etc. The company believes in supplying of the quality products with technical support for providing total solution, to the widely spread clients. Therefore, the products are prepared using the best available resources.

alt
alt

Catlouge Presentation

Click Here to Download

Our E-Catlouge